BS EN 10233-1994 Metallic materials - Tube - Flattening test
|
ID： |
80F0B84CF83F422F8E740FD614EFC574 |
|
文件大小(MB)： |
0.14 |
|
页数： |
10 |
|
文件格式： |
|
|
日期： |
2010-8-10 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,10233:1994,Metallic materials —,Tube — Flattening test,The European Standard EN 10233:1993 has the status of a,British Standard,UDC 669.462:620.177,BS EN 10233:1994,This British Standard, having,been prepared under the,direction of the Iron and,Steel and the Non-ferrous,Metals Standards Policy,Committees, was published,under the authority of the,Standards Board and,comes into effect on,15 May 1994,. BSI 03-2000,The following BSI references,relate to the work on this,standard:,Committee reference ISM/NFM/4,Draft announced in BSI News,April 1991,ISBN 0 580 22878 9,Cooperating organizations,The European Committee for Standardization (CEN), under whose supervision,this European Standard was prepared, comprises the national standards,organizations of the following countries:,Austria Oesterreichisches Normungsinstitut,Belgium Institut belge de normalisation,Denmark Dansk Standardiseringsraad,Finland Suomen Standardisoimisliito, r.y.,France Association fran鏰ise de normalisation,Germany Deutsches Institut für Normung e.V.,Greece Hellenic Organization for Standardization,Iceland Technological Institute of Iceland,Ireland National Standards Authority of Ireland,Italy Ente Nazionale Italiano di Unificazione,Luxembourg Inspection du Travail et des Mines,Netherlands Nederlands Normalisatie-instituut,Norway Norges Standardiseringsforbund,Portugal Instituto Portuguès da Qualidade,Spain Asociación Espa駉la de Normalización y Certificación,Sweden Standardiseringskommissionen i Sverige,Switzerland Association suisse de normalisation,United Kingdom British Standards Institution,Amendments issued since publication,Amd. No. Date Comments,BS EN 10233:1994,. BSI 03-2000 i,Contents,Page,Cooperating organizations Inside front cover,National foreword ii,Foreword 2,Text of EN 10233 3,National annex NA (informative) Committees responsible Inside back cover,BS EN 10233:1994,ii . BSI 03-2000,National foreword,This British Standard has been prepared under the direction of the Iron and Steel,and the Non-Ferrous Metals Standards Policy Committees and is the English,language version of EN 10233:1993 Metallic materials — Tube — Flattening test,published by the European Committee for Standardization (CEN). No British,Standard is superseded.,A British Standard does not purport to include all the necessary provisions of a,contract. Users of British Standards are responsible for their correct application.,Compliance with a British Standard does not of itself confer immunity,from legal obligations.,Summary of pages,This document comprises a front cover, an inside front cover, pages i and ii,the EN title page, pages 2 to 4, an inside back cover and a back cover.,This standard has been updated (see copyright date) and may have had,amendments incorporated. This will be indicated in the amendment table on the,inside front cover.,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 10233,October 1993,UDC 669.462:620.177,Descriptors: Metal tubes, mechanical tests, flattening tests, defects,English version,Metallic materials — Tube — Flattening test,Matériaux métalliques — Tubes —,Essai d’aplatissement,Metallische Werkstoffe — Rohr,Ringfaltversuch,This European Standard was approved by CEN on 1993-10-25. CEN members,are bound to comply with the CEN/CENELEC Internal Regulations which,stipulate the conditions for giving this European Standard the status of a,national standard without any alteration.,Up-to-date lists and bibliographical references concerning such national,standards may be obtained on application to the Central Secretariat or to any,CEN member.,This European Standard exists in three official versions (English, French,German). A version in any other language made by translation under the,responsibility of a CEN member into its own language and notified to the,Central Secretariat has the same status as the official versions.,CEN members are the national standards bodies of Austria, Belgium,Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and,United Kingdom.,CEN,European Committee for Standardization,Comité Européen de Normalisation,Europ鋓sches Komitee für Normung,Central Secretariat: rue de Stassart 36, B-1050 Brussels,. 1993 Copyright reserved to CEN members,Ref. No. EN 10233:1993 E,EN 10233:1993,2 . BSI 03-2000,Foreword,This European Standard has been prepared by,sub-committee ECISS/TC 29, the secretariat of,which has been allocated to the United Kingdom,(BSI).,No meeting of the sub-committee has been held,but the following countries voted positively by the,PQ-procedure on the acceptability of the ……
……